Things to consider when working with metal laminates
We recommend using metal laminates for balancing when processing metal laminates.

Because metal primer is expensive for balancing, our company offers our brown primer in 0.8-0.9 mm thicknesses as an economical alternative. Testing the brown primer should be done first, and only after it is deemed successful should production begin.

When processing metal laminates, the maximum temperature should not exceed 50 degrees Celsius in conventional presses. Pressing should be done at lower temperatures. The recommended adhesive types are PVA and contact-fast adhesives. Glues that have accumulated dust and particles should not be used outdoors, or should be used after removing foreign matter from a strainer. Otherwise, particles that settle under the laminate with the glue will cause boils on the laminate surface.

You can address any irregularities in the press plate by applying a protective plate.


The applied pressure should be low. It should not exceed 1.5-2 kg/cm².