Dekodur Mirror Laminates HPL is a high-pressure laminate (HPL) surface solution with a glossy metallic mirror effect. Compared to float glass mirrors, it offers a lighter-weight approach that is easier to handle; when applied correctly, it delivers a strong mirror-like reflection. It is used by bonding onto substrates such as MDF, particleboard, and similar panels for furniture and interior surface applications. It is designed to remain dimensionally stable against bending and expansion, and to resist discoloration and moisture-related deformation.

Key Advantages

• Premium decorative surface with mirror-effect metallic appearance
• Lighter solution approach than glass mirrors
• Fast application by bonding onto MDF/particleboard-type substrates
• Strong design impact for reception desks, wall/column cladding, and furniture surfaces

Applications

• Suspended ceilings
• Counters and reception desks
• Wall and column cladding
• Office furniture and meeting areas
• Hotel rooms, entrances, and foyer areas
• Kitchen furniture and home furniture
• Retail/store furniture, showcases, and display units

Technical Specifications

• Size: 2440 × 1220 mm
• Size: 3050 × 1220 mm
• Thickness: 0.9 mm

Processing and Application Notes

1) Balancing (Backer) Layer

For metal/mirror-effect laminates, a balancing layer is required to maintain panel stability. The ideal approach is to use an equivalent laminate/backer on the reverse side.
If an economical alternative such as a 0.8–0.9 mm brown backer is used, run a sample trial before production; proceed to manufacturing only after stable results are confirmed.

2) Press Temperature

Temperature control is critical with conventional presses. The press temperature should not exceed 50°C; whenever possible, work at lower temperatures.

3) Adhesive Selection and Cleanliness

Recommended adhesive types: PVA and fast contact adhesives.
Do not use adhesives contaminated with dust/particles. If unavoidable, filter/sieve the adhesive to remove foreign particles before application. Otherwise, embedded particles may cause point defects and blister-like marks on the laminate surface.

4) Press Plates and Protective Sheet

Defects on press plates can transfer as surface marks and deformation. Using a protective sheet/plate improves surface quality.

5) Pressure

Keep applied pressure low. Do not exceed 1.5–2 kg/cm².